Description
MEGAFOAM LOW EXPANSION GUN is high quality, self-expanding, one-component, ready to use polyurethane foam for professional use. It is fitted with a plastic adaptor head for use with a foam applicator gun. It has a minimal expansion after application (less than 50%) and is therefore very economical to use. It contains CFC-free propellants, which are completely harmless to the ozone layer.
ADVANTAGES
- Low post-expansion
- Excellent adhesion on most substrates
- High thermal and sound insulation
- Higher yield - Excellent filling capacities
- Excellent mounting capacities
- Excellent stability
- User and environmentally friendly
APPLICATIONS
- Fixing and sealing of window and doorframes
- Filling of cavities around pipes or other
- Sealing of all openings in roof constructions
- Fixing of insulation materials and roof constructions
- Thermal and sound insulation
- Sealing and filling around pipes and conduits
- Application of a soundproofing layer on motors
- Improving thermal insulation in cooling systems
- Not recommended for applications on Teflon, ΡΕ & ΡΡ
Specifications
 |
 |
 |
 |
|
Coverage:
750ml yield up to 40Lt of cured foam
|
Thinning:
no
|
Skin formation:
8 minutes 20oC
|
Curing Rate:
1,5 hour for a 30 mm bead 20oC
|
 |
 |
 |
 |
|
Exterior use
|
Interior use
|
Application temperature:
+5oC to +35oC
|
Cleaning:
with MERCOLA PU GUN & FOAM CLEANER or acetone
|
Instructions for use
Surface preparation
Moistening of the surfaces and the uncured foam with a water sprayer improves adhesion and curing speed.
Application
- Surfaces must be clean, free of dust and grease.
- Wear suitable protective gloves.
- Shake the can well for at least 30 seconds.
- Fit the gun on the adapter.
- Hold the can upside-down and extrude the foam by pressing the valve.
- Gaps have to be filled partially up to 65% as the foam will expand.
- Repeat shaking regularly during application.
- If you have to work in layers, repeat moistening after each layer.
A suitability test is recommended.
REMARKS
- Avoid contact with uncured foam after application especially at low temperatures.
- Cured PU foam must be protected from UV radiation by applying a top layer of PU or acrylic paint or sealant (silicone, acrylic, MS Polymer).
CLEANING
Fresh foam can be removed with GUN & FOAM CLEANER or acetone. Proper cleaning of the gun after each application guarantees long life of the gun. Cured foam can only be removed mechanically.
