Description
PREMIUM FLOOR VARNISH is a clear 2 component acrylic - polyurethane varnish that provides ultimate long lasting protection of exterior and interior wood, cement, stone and metallic floors. It contains UV filters which protect against sunlight. The durable polyurethane based formula provides a long lasting finish with excellent mechanical and chemical resistance as well as resistance to pedestrian traffic, humidity and extreme weather conditions. The excellent combination of hardness and elasticity make it the ideal floor varnish.
ADVANTAGES
- Forms an elastic, seamless, transparent protective membrane
- Excellent traffic and wear resistance
- Excellent adhesion properties
- Excellent sun and frost resistance
- In case of mechanical damage, the membrane can be easily repaired locally in minutes.
APPLICATIONS
- Ideal for use on all exterior and interior wood parquet floors
- Waterproofing, sealing and protection of cement floors
- Waterproofing, sealing and protection of natural stone floors(for artificial stones a compatibility test is recommended)
- Ideal finish – varnish for metallic floors and surfaces
- Protection and waterproofing of most building surfaces
Specifications
 |
 |
 |
 |
|
Coverage:
5 - 10 m2/Lt
|
Thinning:
5 - 10% with DIL X – 100
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by spray gun
|
Touch dry:
6 - 10 hours 20oC
|
Hard dry:
48 hours 20oC
|
Exterior use
|
 |
 |
 |
|
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with white spirit
|
|
Instructions for use
Surface preparation
Careful surface preparation is very important for optimum finish and durability.
- The substrate should be dry and free from dust, chalk, grease and any foreign material that may harmfully affect adhesion.
- Old, loose coatings, dirt, fats, oils, organic substances and dust need to be removed by mechanical means such as a sanding machine or where possible with high pressure washing machine. Possible dust after sanding must be removed.
- Light sanding of wood parquet is necessary. Carefully remove dust. Internal moisture of wood must not exceed 12%-14%.
- New concrete floors need to dry for at least 28 days. Moisture must not exceed 5% and ambient humidity not over 70%.
- All substrates must be completely dry prior to application and rain must be avoided for 48 hours.
- Minimum application temperature 10oC.
Priming
Unsound surfaces can be primed with same material diluted 15-20 % with solvent DIL X - 100 for substrate strengthening.
Application
- Mix carefully the 2 components taking care to ensure thorough mixing on the walls and the bottom of the pail.
- Allow mixture to stand for 10-15 minutes.
- Apply the first coat with a roller, brush or spray gun.
- You must avoid to apply the varnish in heavily – thick coats, since it will wear rapidly.
- The second coat may be applied when the first is thoroughly dry (6-24 hours depending on ambient temperature).
- For maximum durability apply a third coat.
- The final curing is achieved in 14 days (25oC).
Maintenance of surface: wash with a mild detergent and water, and rinse thoroughly.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
