Description
ISOMIX BETON PRIMER is an excellent adhesion promoting primer based on a blend of acrylic resins and quartz sand. It is specially formulated for smooth and low absorption surfaces. (i.e. cementboards, exposed concrete, polystyrene boards etc.), providing a rough surface which ensures excellent adhesion in the following applications. It shows great resistance in an alkaline environment. The product does not contain solvents.
ADVANTAGES
- Excellent surface adhesion and high capacity of penetration on low absorption surfaces.
- Ideal for strengthening the surface applied.
- Adhesion bridge for the application of wall plaster or other mortars.
- Dries fast and does not cause yellowing.
- Interior and exterior use.
- Easy to apply.
- Colored for distinguishing applied areas.
APPLICATIONS
- Suitable for priming smooth surfaces as an adhesion bridge before the application of wall plaster or acrylic stucco.
- It is suitable for priming exposed concrete, plasterboards, cement boards, polystyrene boards (EPS & XPS), cement surfaces, marble, mosaic, wood and painted metallic surfaces.
- It is also suitable for priming the surface of old ceramic tiles before laying and gluing new ones on top.
A suitability test is recommended due to the different quality and texture of ceramic tiles.
Specifications
 |
 |
 |
 |
|
Coverage:
0,2 - 0,4 kg/m2
|
Thinning:
Not required
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by brush
|
Touch dry:
4 hours
|
Hard dry:
5 Days
|
Exterior use
|
 |
 |
 |
|
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with soap and water
|
|
Instructions for use
Surface preparation
Surfaces must be dry and clean from dust, grease and loose particles and other contamination
Application
- ISOMIX BETON PRIMER is ready to use - does not need any thinning.
- Stir the product very well prior to its application.
- Apply with a brush, roller or other available spraying system.
- Plastering or bonding should be carried out when the treated surface is fully dried, avoiding dust deposits.
Cleaning
Clean all equipment immediately after use with soapy water.