Description
ISOMIX QUARTZ GLASS PRIMER is a new super-fast drying bonding primer based on hybrid technology polymeric resins reinforced with special grain size pure quartz sand. It is specially designed to perform as a bonding layer on glazed and other substrates with low absorption capacity because of low porosity such as ceramic tiles, marble, mosaics, cement floors etc. Presents excellent bonding strength and resistance to ageing. The primer dries rapidly, allowing for quick overcoat in just 15’ – 2h (depending on the temperature and relative humidity) of the desired tile or other adhesive or render. It shows great resistance in an alkaline environment.
ADVANTAGES
- Excellent surface adhesion properties to most substrates
- Excellent penetration
- Ideal for strengthening the surface applied
- Fast drying - can be overcoated within 15’ – 2 hours
- Suitable for cementitious and other adhesives & renders
- Interior and exterior use
- Easy application, user-friendly
- Colored for distinguishing applied areas
APPLICATIONS
- It is ideal for creating suitable adhesion conditions for bonding new ceramic tiles on low porosity surfaces such as glazed ceramic tiles, marble, mosaics, cement floors etc.
- It is also suitable for priming exposed concrete, cement boards, polystyrene plates EPS & XPS, concrete, wood, natural stones etc.
- Suitable for priming smooth surfaces as an adhesion bridge before the application of wall plaster or acrylic stucco.
It is advisable to perform a suitability test prior to full scale application.
Specifications
 |
 |
 |
 |
|
Coverage:
0,2 - 0,4 kg/m2
|
Thinning:
Not required
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by brush
|
Touch dry:
15' - 2 hours
|
Hard dry:
4 Days
|
Exterior use
|
 |
 |
 |
|
|
Interior use
|
Application temperature:
+5oC to +35oC
|
Cleaning:
with soap and water
|
|
Instructions for use
Surface preparation
Surfaces must be dry and clean from dust, grease and loose particles and other contamination
Application
- Stir the product well prior to application.
- ISOMIX QUARTZ GLASS PRIMER is ready to use - no thinning required.
- Apply with a roller or airless spray evenly on the substrate.
- If necessary, a second layer may be applied to achieve the desired roughness.
- The installation of the new tiles can be carried out in 15’ - 2 hours avoiding dust deposits.
Cleaning
Clean all equipment immediately after use with soapy water.